Hand Lever Presses

Universal Spring Percussion Presses

Application fields:
For stamping, embossing, numbering, aligning, riveting, punching, etc.

Function:
By pressing down the hand lever, the special spring is tensioned and triggered after lowering the tool on the work piece.
The impact is transferred to the work piece and can be adjusted continuously.

Advantages:

  • Continuously adjustable impact strength
  • High impact with low power input
  • Tolerance compensation (always the same impact strength with different work piece heights)
  • Pneumatic drive can be installed retrospectively

 

Technical data:

 

  SP 1 SP2 SP3
Impact strength (continuously adjustable)
6kN 20 kN 45 kN
Total die-set height 500 650 1000
Die-set diameter 30 40 70
Expansion 85 122 175
Distance from the center of the impact shaft to the die-set 100 140 195
Max. work height 300 350 490
T-groove height 6 8 12
Pliers diameter of the tool holder Ø 6 Ø 10 Ø 16
Space requirement (width x depth) 130 x 215 200 x 315 280 x 445
Weight 12kg 32kg 105 kg

 

 


Toggle Press

Application fields:
For stamping, embossing, numbering, hot-stamping, printing, riveting, punching, etc.

Function:
The maximum force is reached at the bottom end of the lift by pulling down the toggle (toggle principle).This ensures a constant embossing depth.

Advantages:

  • Long, exact ram guide· Depth stop
  • User-friendly
  • Variable lift and work height

Technical data:

 

    229/3 229/4 229/5 229/6 229/7 229/8 229/9
Pressure kN 12 12 12 12 15 15 22
Work lift   45 60 45 60 25 25 40
Adjustable work height mm 80–210 80–210 120–360 120–360 80–210 120–360 90-220
Expansion mm 86 86 86 86 86 86 130
Ram boring mm 10H7 x 28 10H7 x 28 10H7 x 28 10H7 x 28 10H7 x 28 10H7 x 28 20H7 x 50
Ram diameter mm 25 25 25 25 25 25 36 x 62
Table boring mm 20H7 20H7 20H7 20H7 20H7 20H7 25
Table width mm 150 x 110 150 x 110 185 x 115 185 x 115 150 x 110 185 x 113 200 x 160
Groove width mm 10H9 10H9 10H9 10H9 10H9 10H9 10H9
Weight approx. kg 22 22 30 30 23 31 85